| Customization: | Available |
|---|---|
| Type: | Gyratory Crusher |
| Motor Type: | AC Motor |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
GC Series Gyratory Crusher
1. The special deep-cavity crushing chamber and longer feed opening designed, which make the feeding smoothly and realize the continuous crushing. GC series gyratory crusher has large throughput, high-efficiency crushing, big crushing ratio, superior product shape and easy maintenance, as well as less liner wear and low operation cost.
2. The main shaft can be easily adjusted by its positioning control system to make up for the liners wear so that controlling the product shape.
3. The balance cylinder system can prevent main shaft runout. This system can make the main shaft falling automatically under overloading, which avoid the main shaft runout impacting on the equipment when the large block of materials entered into the machine, to ensure the safe and stable running.
4. GC gyratory crusher equipped with pressure dust control system can effectively prevent dust from entering into the eccentricity device and transmission device of equipment, which can extend the service life of the bearings.
5. The high-strength extra-heavy frame, integral large main shaft assembly and high-performance bearings, which can ensure the service life of machine is more longer, the operation is more safe and reliable under kinds of bad working conditions.
| Model | Feed Opening | Rotate Speed | Power | CSS(mm) / Throughput Capacity(t/h) | ||||||||||
| (mm) | (rpm) | (kw) | 125mm | 140mm | 150mm | 165mm | 175mm | 190mm | 200mm | 215mm | 230mm | 240mm | 250mm | |
| GC42-65 | 1065 | 600 | 375 | 2000 | 2320 | 2500 | 2860 | |||||||
| GC50-65 | 1270 | 600 | 375 | 2380 | 2770 | 2920 | ||||||||
| GC54-75 | 1370 | 600 | 450 | 2870 | 2970 | 3130 | 3320 | 3470 | ||||||
| GC62-75 | 1575 | 600 | 450 | 2880 | 3600 | 3810 | 4200 | 4220 | ||||||
| GC60-89 | 1525 | 600 | 600 | 4180 | 4530 | 5070 | 5280 | 5520 | 5800 | |||||
| GC60-110 | 1525 | 600 | 1200 | 5520 | 6930 | 7320 | 7560 | 8270 | 8580 | 8880 | ||||
Remark: The above capacities are based on an assumed feed where 100% of the feed passes 80% of the feed opening. 80% of the feed passes 50% of the feed opening, and 30% of the feed passes a sieve size that is 10% the feed opening. The capacities are for feed materials with a bulk density of 1.6t/m³. All capacities are calculated at a maximum throw for respective machine.
GC Gyratory Crusher is mainly composed of beam, frame, moving cone, eccentric sleeve, transmission part and hydraulic cylinder. Driven by the motor, the horizontal shaft starts to rotate which will further make the eccentric sleeve rotate under the assistance of gear. Next, the eccentric sleeve will drive moving cone to swing in a circular motion, so as to squeeze and crush rocks continuously.
By adjusting the hydraulic cylinder on the bottom of moving cone, the cone will move up and down to adjust the opening of discharge port so as to control the granularity of final products. Meanwhile, the hydraulic cylinder has a protection function when iron block intrudes. If there are unbreakable materials such as iron block entering the crushing cavity, the hydraulic cone crusher will drop the moving cone to discharge iron block while the crushing continues.
1. Installation
We will send the engineer to guide your workers to install the machine, take trial run; the buyer should prepare the materials and tools needed, and offer necessary assistance. The actual expenses incurred for accommodation, to and fro travel for the engineer, and insurance, should be borne by the buyer. The buyer should pay 100USD per engineer per day within the first 40 days, and 150 dollars in the following time.
2. Warranty
100% brand new when leaving the factory. The seller guarantee quality of the machines (excluding wearing parts)for a period of one year from the date of trial run finish under our technician's guidance, but not exceed 15 months from date on which machine leaves the factory.
ATAIRAC is an international company cooperated with a France company. ATAIRAC was founded in 1958 .Now we have 1068 employees and our group covers an area of 300,000 square meters. Our company's equipment has reached more than 10 large series, such as the Granite Jaw Crusher for Aggregate Price, impact crusher, cone crusher, vertical complex crusher, vertical shaft impact crusher, ball mill, rod mill, sand washer, etc.
){kind=link}