| Customization: | Available |
|---|---|
| Type: | Roller Crusher |
| Application: | Construction, Mineral Industry, Stone Industry |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ATAIRAC PGQ Series roll crusher is applied to crush various medium hardness materials such as limestone, slag, coal etc. in metallurgy, cement, chemistry and other industries, it used as primary and secondary crushing equipment.
Theb crusher has many advantages, such as, simple structure, convenient maintenance, low cost.
| Type | Model | Feed size(mm) | Discharge size | Capacity(m3/h) | Power | Dimension |
| (mm) | (kw) | (mm) | ||||
| StrongDouble-roller crusher | 2PGQ 610×400 | 0-36 | 2-9 | 3-9 | 22 | 1785×2365×1415 |
| 2PGQ 750×500 | 0-40 | 2-10 | 5-12 | 18.5×2 | 2720×2700×1400 | |
| 2PGQ 750×700 | 0-40 | 2-10 | 6-16 | 22×2 | 2800×3987×1705 | |
| 2PGQ 900×500 | 0-40 | 2-10 | 9-30 | 22×2 | 2750×1790×2065 | |
| 2PGQ 900×900 | 0-40 | 2-10 | 11-45 | ~37×2 | 2750×2180×2065 | |
| 2PGQ 900×1200 | 0-40 | 3-10 | 15-60 | ~55×2 | 2750×2480×2065 | |
| 2PGY 1200×1000 | 0-40 | 3-12 | 10-50 | ~55×2 | 3690×3430×2700 | |
| 2PGY 1200×1200 | 0-40 | 3-12 | 18-68 | ~75×2 | 3690×3630×2700 | |
| Four-roller crusher | 4PG750×500 | 30-60 | 2-10 | 3-10 | 18.5+11/17 | 2760×3585×2650 |
| 4PG900×700 | 40-100 | 2-10 | 16-20 | 30+12/24 | 3150×4175×3147 | |
| 4PG900×900 | 40-100 | 2-10 | 20-25 | 45×2 | 3150×2650×3147 | |
| 4PGY1200×1000 | 20-40 | 3-10 | 43-68 | 75+40/55 | 5410×5600×3600 | |
| Double teeth roller crusher | 2PGC450×500 | 100-200 | 25-100 | 12-32 | <11 | 2260×2206×766 |
| 2PGC600×750 | 300-600 | 50-125 | 50-75 | <22 | 3265×2850×1310 | |
| 2PGC900×900 | 0-800 | 75-150 | 60-110 | <30 | 3945×3405×1895 | |
| 2PGC920×1200 | 0-800 | 40-100 | 90-150 | <75 | 3848×3480×1394 | |
| 2PGC1200×1500 | 0-1000 | -100 | 150-250 | 2*55 | 8010×4050×2050 |
(1) Adopt triangle belt driving between motor and reducer. The triangle belt will slip if load is too big, which can protect the motor.
(2) The connection between the swing roller part and reducer adopts universal spindle coupling, which not only make sure the swing roller have enough adjusting range but also protect the motor and reducer in case that damage due to overload.
There is a wedge-shaped device or gasket adjustment device between the two rolls and on the top of the wedge-shaped device placed an adjusting bolt. When the adjusting bolt pulls up the wedge, the wedge will move the movable roll from the fixed roll, so the gap between the two rolls become large, and the discharging granularity will get big. When the wedge goes down, under the effect of pressure spring, the gap between them become small and the discharging granularity will get small. The gasket device adjusts the granularity of discharging material by increasing or decreasing the number or thickness of the gasket. When the gasket number increases, the gap between the two rolls become large and the discharging granularity will get big. When the gasket number decreases, the gap between the two rolls become small and the discharging granularity will get small.
The roll crusher should be processed to be rustproof and moisture proof before delivery. The small parts are packed into wooden crates; the big parts are wrapped by plastic sheeting.
ATAIRAC History&Scale
Established Time:In 1958
){kind=link}